Original Sizes; Specifying The Original Size - Sharp MX-B382 Operation Manual

ORIGINAL SIZES

SPECIFYING THE ORIGINAL SIZE

The original size is set in "Default original size setting" in the system settings (administrator), and the setting appears in
the [Original] key. This section explains the procedure for specifying the setting when the original size is different from
size shown in the [Original] key.
Touch the [Original] key and perform the following.
Specifying an AB original size
(1)
Original
A5 216x330
B5 216x340
A4 216x343
Size Input
Specifying an inch original size
(2)
Original
5½x8½ 8½x14
2
8½x11 8½x13
5
8½x13
Size Input
(1)
Original
Original Exit
Upper Exit
Place
A5 216x330
B5 216x340
A4 216x343
Size Input
(2)
OK
16K
AB
Inch
Custom Size None
(1) (3)
OK
AB
Inch
Custom Size None
(2)
OK
Heavy Exit
16K
AB
Check Size
Inch
Card Size
Custom Size None
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
(1) Touch the [AB
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
With the MX-B382SC, touch the
[Original] key to display the screen at
left.
(1) The original output destination for the
automatic document feeder can be
selected.
(2) When a card size original is set in the
automatic document feeder, the card size
can be selected.
2-29
COPIER
Inch] key.
Contents