Insert the next set of originals and press the [START] key.
Repeat this step until all originals have been scanned.
4
To cancel scanning...
Press the [STOP] key (
Place next original. Press [Start].
When finished, press [Read-End].
5
To cancel copying...
Press the [STOP] key (
If the Quick File Folder of document filing mode is full, copying in job build mode will be impeded. Delete unneeded files from
the Quick File Folder.
To cancel job build mode....
Touch the [Job Build] key in the screen of step 2 so that it is not highlighted.
). All scanned data will be cleared.
Touch the [Read-End] key.
Read-End
).
2-52
COPIER
Contents