Sharp MX-B382 Operation Manual page 396

Fax/Original
Size Input
4
MX-B382:
• When a number from 298 mm to 356 mm (11-3/4" to 14") to the X (horizontal) dimension and a number from 25 mm
to 99 mm (1" to 3-7/8") to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.
• You can also touch the
MX-B382SC:
• When a number from 298 mm to 356 mm (11-3/4" to 14") to the X (horizontal) dimension and a number from 25 mm
to 50 mm (1" to 1-7/8") to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.
• When the X (horizontal) value is set to 105 mm (4-1/8") or lower and the Y (vertical) value is set to 74 mm (2-7/8") or
lower, "Card Size" is automatically selected and the original exit place is fixed to the heavy exit.
• You can also touch the
(1), (2) (3)
OK
Cancel OK
X 297
(25 356)
mm
Y
210
(25 216)
mm
keys to change the number.
keys to change the number.
Enter the scan size.
(1) Enter the X (horizontal) dimension of the
original.
Touch the X (width) numeric value display key to open a
number entry screen. Enter the width of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. When the document glass is used, enter a
number from 25 mm to 297 mm (1" to 11-5/8").
MX-B382:
When the automatic document feeder is used, enter a
number from 89 mm to 356 mm (3-1/2" to 14").
When a number which is from 139 mm (5-3/8") and less is
entered in 2-Sided scanning setting, an original cannot be
scanned.
If the horizontal dimension of the original is less than
89 mm (3-1/2"), use the document glass.
MX-B382SC:
When the automatic document feeder is used, enter a
number from 85 mm to 356 mm (3-1/4" to 14").
When a number which is from 84 mm (3-1/8") and less is
entered in 2-Sided scanning setting, an original cannot be
scanned.
If the horizontal dimension of the original is less than
85 mm (3-1/4"), use the document glass.
(2) Enter the Y (vertical) dimension of the
original.
Touch the Y (height) numeric value display key to open a
number entry screen. Enter the height of the original with
the numeric keys, and touch the [OK] key in the number
entry screen. When the document glass is used, enter a
number from 25 mm to 216 mm (1" to 8-1/2").
MX-B382:
When the automatic document feeder is used, enter a
number from 100 mm to 216 mm (4" to 8-1/2").
If the vertical dimension of the original is less than
100 mm (4"), use the document glass.
MX-B382SC:
When the automatic document feeder is used, enter a
number from 51 mm to 216 mm (2" to 8-1/2").
If the vertical dimension of the original is less than 51 mm
(2"), use the document glass.
(3) Touch the [OK] key.
To complete the setting and return to the screen of step 3,
touch the [OK] key next to the [Cancel] key.
4-52
FACSIMILE
Contents