Scanning A Document Into Polling Memory - Sharp MX-B382 Operation Manual

SCANNING A DOCUMENT INTO POLLING MEMORY

Follow these steps to scan a document into the memory box for polling transmission (Public Box).
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
When the original is a different size than the size setting, set the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Memory Box] key.
☞
SPECIAL MODES
Memory Box
Polling Memory
3
Data Store Data Check
Memory Box - Data Store
Box 1
Box 3
4
Box 5
Box 7
Box 9
Box 11
Memory Box - Data Store
5
keys to switch through the screens.
(page 4-71)
Exit
Confidential
Reception
Delete Data Print Data
Back
Public Box
Box 2
Box 4
Box 6
Box 8
Box 10
Box 12
(1) (2)
OK
Once
Unlimited
(page 4-47)
Touch the [Data Store] key.
Touch the [Public Box] key.
1
2
Specify the number of polling times.
(1) Touch the key for the desired number of
times.
Touch the [Once] key if you want the document cleared
from memory after it is transmitted. Touch the [Unlimited]
key to allow polling an unlimited number of times.
(2) Touch the [OK] key.
4-100
FACSIMILE
Contents