Scanning Both Sides Of A Card Ontoa Single Page (Card Shot) - Sharp MX-B382 Operation Manual

SCANNING BOTH SIDES OF A CARD ONTO
A SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side
separately.
Originals
Front
Back
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
• Depending on the card type, some cards cannot be used with the automatic document feeder.
MX-B382:
1
MX-B382SC:
Specify the destination.
☞
ENTERING DESTINATIONS
2
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
Transmission
MX-B382:
Place the original face down on the document glass.
MX-B382SC:
Place the original face up in the document feeder tray, or face
down on the document glass.
When the original is a different size than the size setting, set
the original size.
☞
(page 5-18)
5-83
SCANNER/INTERNET FAX
Scanned image
SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE (page 5-56)
Contents