Using The Document Glass To Make 2-Sided Copies - Sharp MX-B382 Operation Manual

USING THE DOCUMENT GLASS TO MAKE 2-SIDED
COPIES
Portrait original
1
Landscape original
A
Exposure
Auto
2
Copy Ratio Original
100%
Originals
Automatic 2-sided copying of 1-sided
originals
Align the top edge of the
original against the side of
the document glass with
the scale.
Align the right side of the
original against the side of
the document glass with
the scale.
Special Modes
2-Sided Copy
Plain
A4
Output
1. A4
2. A5
File
A4
3.
A4
4.
Quick File
Paper Select
Auto
A4
Plain
Copies
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
A5
(5-1/2" x 8-1/2")
B5
A4 (8-1/2" x 11")
• The maximum original size that can be placed on the
document glass is A4 (8-1/2" x 11").
• Align the middle of the original with the tip of the
• Place the original in the appropriate position for its size as
shown above.
• After placing the original, be sure to close the automatic
document feeder. If left open, parts outside of the original will
be copied black, causing excessive use of toner.
Touch the [Original] key.
2-20
COPIER
mark.
Contents