Sharp MX-B382 Operation Manual page 398

Specifying the send size of the original
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
Touch the [Original] key.
1
☞
IMAGE SETTINGS
Fax/Original
Scan Size
A4
2
2-Sided 2-Sided
Tablet
Booklet
Fax/Original
Auto
Manual
A5
B5
3 A4 216x330
16K
• Depending on the "Scan Size" setting, it may not be possible to select some sizes for the "Send Size". Size keys
that cannot be specified for the "Send Size" are greyed out to prevent selection.
• To specify an Inch size for the send size, touch the [AB
send size.
(page 4-45)
OK
100% Send Size
Auto
Image Orientation
(1) (2)
OK
B4 216x340
AB
A3 216x343
Inch
8K
Touch the [Send Size] key.
Specify the send size.
(1) Touch the desired send size key.
(2) Touch the [OK] key.
Inch] key to highlight the [Inch] side and then specify the
4-54
FACSIMILE
Contents