Frequently Asked Questions; Making A Copy Of A Non-Standard Size Original - Sharp MX-M502N Operation Manual

FREQUENTLY ASKED QUESTIONS

Making a copy of a non-standard size original

The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centring" special mode of copy mode can be selected to position the copied
image in the centre of the paper.
1 Place the originals.
3 Place paper in the bypass tray.
The bypass tray is used here to copy
onto paper that is not loaded in any of
the paper trays of the machine.
If the X dimension
(width) of the
document is less than
140 mm (5-1/2") or
the Y dimension
(height) is less than
131 mm (5-5/32"),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
Type : Recycled
Size : A4
2 Enter the original size.
From the base screen of copy mode,
touch [Original] then [Size Input].
Original
Size Input
4 Select the bypass tray.
From the base screen of copy mode,
touch [Paper Select] and then "Bypass
tray paper type".
Paper Select
Bypass Tray Type/Size Setting
Select the paper type.
Plain Pre-Printed
Pre-Punched
Heavy Paper Transparency
Heavy Paper: 106 - 209 g/m
Paper Select
Paper Tray
1. A4
2. A4R
3. B4
4. A3
8-4
TROUBLESHOOTING
OK
Cancel OK
X 200
(25-432)
mm
Y 150
(25-297)
mm
Cancel
1
Recycled Letter Head 2
Colour Thin Paper Labels
Tab Paper Envelope
2
(28 lbs.bond, 110 lbs.index)
OK
Bypass Tray
A4
Plain
Recycled
Plain
Plain
Plain
Contents