Problems Related To Print Results - Sharp MX-M502N Operation Manual

PROBLEMS RELATED TO PRINT RESULTS

Problem
The image is too light
or too dark.
Text and lines are faint
and difficult to see.
Part of the image is
cut off.
Point to check
Does the image (particularly a photo)
need correction?
(Windows)
Was colour data printed?
(Windows)
Does the paper size specified by the job
match the size of paper loaded in the
tray?
Is the print orientation setting (portrait or
landscape) correct?
Are the margins set correctly in the
layout settings of the application?
Check the settings of the printer driver.
Brightness and contrast can be corrected by performing
[Image Adjustment] on the [Advanced] tab of the printer
driver. These settings can be used for simple
corrections when you do not have image editing
software installed on your computer.
Check the settings of the printer driver.
When colour text and lines are printed, they may
become faint and difficult to see. To have colour text or
lines (areas) that are faint converted to black, select
[Text To Black] or [Vector To Black] on the [Advanced]
tab of the printer driver. (Raster data such as bitmap
images cannot be adjusted.)
Make sure that the paper size setting matches the
size of paper loaded in the tray.
The paper size setting is selected as follows:
Windows:
On the [Paper] tab of the printer driver.
If [Fit to Paper Size] is selected, check the loaded
paper and the paper size setting.
Macintosh:
In the [Page Setup] menu.
Set the print orientation to match the image.
The print orientation is selected as follows:
Windows: On the [Main] tab of the printer driver.
Macintosh: In the [Page Setup] menu.
Select an appropriate paper size and margins in the
layout settings of the application.
If the edge of the image extends outside the printable
area of the machine, the edge will be cut off.
8-31
TROUBLESHOOTING
Solution
Contents