Adjusting The Sharpness Of An Image (Sharpness) - Sharp MX-M502N Operation Manual

ADJUSTING THE SHARPNESS OF AN
IMAGE (Sharpness)
This is used to sharpen an image or make it softer.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Sharpness] key.
Special Modes
Sharpness
3
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
4
touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
When this function is selected, the exposure adjustment setting automatically changes to manual adjustment.
Automatic exposure adjustment cannot be selected.
To cancel the sharpness setting...
Touch the [Cancel] key in the screen of step 3.
keys to switch through the screens.
(1) (2)
OK
Cancel
OK
Soft Sharp
).
Soft
Sharp
Adjust the image.
(1) Touch the [Soft] key or the [Sharp] key so
that it is highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-115
COPIER
Contents