Before Using The Machine As Acopier; Base Screen Of Copy Mode - Sharp MX-M502N Operation Manual

BEFORE USING THE MACHINE AS A
COPIER
This section provides information that you should know before using the machine as a copier.

BASE SCREEN OF COPY MODE

Touch the [COPY] key in the touch panel to open the base screen of copy mode.
The base screen shows messages and keys necessary for copying, and settings that have been selected.
(1) Mode Select keys
Use these keys to switch between copy, image send, and
document filing modes.
If you wish to switch to copy mode, touch the [COPY]
key.
(2) Output display
When one or more output functions such as sort, group,
staple sort, or saddle stitch have been selected, this
shows the icons of the selected functions.
☞
OUTPUT (page 2-31)
(3) [Exposure] key
This shows the current copy exposure and original type
settings. Touch this key to change the exposure or
original type setting.
☞
CHANGING THE EXPOSURE AND ORIGINAL
IMAGE TYPE (page 2-21)
(4) [Copy Ratio] key
This shows the current copy ratio. Touch this key to
adjust the copy ratio.
☞
REDUCTION/ENLARGEMENT/ZOOM
(1)
COPY IMAGE SEND
Ready to scan for copy.
(2)
Exposure
Auto
(3)
(4) Copy Ratio Original
100%
Auto
(5)
A4
(6)
(page 2-23)
(7) (8)
DOCUMENT
FILING
Special Modes
2-Sided Copy
Plain
A4
Output
1. A4
A4R A4
2. 5.
File
B4
3.
A3
4.
Quick File
Paper Select
Auto
A4
Preview
Plain
(5) [Original] key
Touch this key to enter the original size manually.
When an original is placed, the detected original size is
displayed. If the original size is set manually, the set size
appears.
☞
ORIGINAL SIZES
(6) [Paper Select] key
Touch this key to change the paper (tray) that is used.
The tray, paper size, and paper type will appear. Trays 1
to 5 can also be touched in the paper size display to open
the same screen.
☞
PAPER TRAYS
(7) Original feed display
This appears when an original is inserted in the
automatic document feeder.
2-3
(9)
0
(10)
(11)
(12)
(13)
(14)
(page 2-27)
(page 2-11)
Contents
COPIER