Polling Reception Using F-Codes - Sharp MX-M502N Operation Manual

POLLING RECEPTION USING F-CODES

This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory
box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code
(sub-address and passcode) configured in the other machine or polling reception will not take place.
• Verify the F-code (sub-address and passcode) of the memory box in the other machine before you perform F-code polling
reception.
• Do not place an original in the automatic document feeder or on the document glass when using this function.
• The receiving machine bears the phone charges of the transmission.
Fax/Special Modes
Verif.
Stamp
1
Own Name
Select
Transmission request (polling)
using an F-code
Sub-address:
Passcode:
The machine
(3) (2) (4)
OK
Transaction
Report
2
Memory Box
Polling
2
AAAAAAAA
XXXXXXXX
Transmission
Box name:
Sub-address:
Passcode:
Select polling.
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the
screens.
(3) Touch the [Polling] key so that it is
highlight.
(4) Touch the [OK] key.
4-114
FACSIMILE
The other machine
F-code polling memory box
BBBB
AAAAAAAA
XXXXXXXX
(page 4-70)
keys to switch through the
Contents