Reversing The Image (Mirror Image) - Sharp MX-M502N Operation Manual

REVERSING THE IMAGE (Mirror Image)

This feature is used to make a copy that is a mirror image of the original.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Image Edit] key.
☞
[Image Edit] KEY
Special Modes
Image Edit
3
Photo Repeat
A3
Full Bleed
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have
selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the
4
[Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel a mirror image setting...
Touch the [Mirror Image] key in the screen of step 3 so that it is not highlighted.
Original
keys to switch through the screens.
(page 2-104)
(1) (2)
OK
OK
Multi-Page Mirror
Enlargement Image
Centring
).
Mirror image copy
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is
highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-110
COPIER
Contents