System Settings (General); Accessing The System Settings (General) - Sharp MX-M502N Operation Manual

SYSTEM SETTINGS (GENERAL)

This section describes the system settings that can be configured by general users of the machine.

Accessing the System Settings (General)

JOB STATUS PRINT
READY
DATA
SYSTEM
SETTINGS IMAGE SEND
LINE
DATA
HOME
System Settings
Total Count Default Settings
Paper Tray
Address Control
Settings
Printer Condition Document Filing
Settings Control
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see
"1. BEFORE USING THE MACHINE".
LOGOUT
Admin Password Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Make sure that the machine is in the standby state and
then press the [SYSTEM SETTINGS] key on the
operation panel.
When the [SYSTEM SETTINGS] key is pressed, the
following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure.
For detailed explanations of each of the settings, see the
following pages of this chapter.
"USER AUTHENTICATION" (page 1-17) in
7-5
SYSTEM SETTINGS
Contents