Giving Priority To A Scan Transmission Job - Sharp MX-M502N Operation Manual

GIVING PRIORITY TO A SCAN
TRANSMISSION JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If
you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
1
(1)
Print Job Scan to
Address Set Time
Broadcast 10:00 04/01 020/003 Connecting
1
10:05 04/01 000/001 Waiting
2 AAA AAA
3 BBB BBB 10:22 04/01 000/004 Waiting
2
10:30 04/01 000/010 Waiting
4 CCC CCC
JOB STATUS
(1)
Fax Job Internet Fax
Pages
Status
Job Queue
Complete
1
1
Detail
Priority
Stop/Delete
(2) (3)
Press the [JOB STATUS] key.
Select the job to which you wish to give
priority.
(1) Touch the mode tab of the job to be given
priority.
(2) Touch the key of the job to be given priority.
(3) Touch the [Priority] key.
The selected job moves up to the position immediately
following the job in progress. The job will be executed
when the job in progress is completed.
5-108
SCANNER/INTERNET FAX
Contents