Sharp MX-M502N Operation Manual page 823

(8) Paper misfeed in the bypass tray
(9) Paper misfeed in tray 1 to tray 4 (side)
(10) Paper misfeed in the transport area
(11) Paper misfeed in tray 1 to tray 4 (in the
tray)
remove the pieces that remain in the machine.
☞
(9) Paper misfeed in tray 1 to tray 4 (side)
Remove the misfed paper.
The misfeed may have
occurred inside the machine.
Check carefully and remove
it.
Lower the lever in the
direction of the arrow to
remove the misfed paper.
Before pulling the tray out,
open the right cover and
check if there is a paper
misfeed. If you pull the tray
out without checking, you
may tear misfed paper and
make it more difficult to
(12) Paper misfeed in the finisher
(13) Paper misfeed in the output area
8-12
TROUBLESHOOTING
Open the front cover.
While pressing the lever over
to the left, slide the finisher to
the left until it stops.
Turn roller rotating knob in
the direction of the arrow to
remove the misfed paper.
Make sure that there is no
misfed paper in the machine.
Remove the misfed paper.
Contents