Automatically Scanning Both Sides Of An Original (2-Sided Original) - Sharp MX-M502N Operation Manual

AUTOMATICALLY SCANNING BOTH SIDES OF AN
ORIGINAL (2-Sided Original)
The automatic document feeder can be used to automatically scan both sides of an original.
(When a reversing single pass feeder is installed.)
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Original] key.
☞
IMAGE SETTINGS
Scan/Original
Scan Size
Auto
2-Sided 2-Sided
Booklet Tablet
2
(1)
To cancel 2-sided scanning, touch the highlighted key so that it is no longer highlighted.
2-sided scanning automatically turns off after the transmission operation is completed.
Scan transmission
2-sided original
(page 5-53)
(3)
OK
100% Send Size
A4 Auto
Image Orientation
(2)
Front and reverse sides are scanned
Specify the binding style of the 2-sided
original (book or tablet) and the
orientation in which the original is placed.
(1) Touch the [2-Sided Booklet] key or the
[2-Sided Tablet] key.
A book and a tablet are bound as shown below.
Book
A
C
(2) Touch the appropriate [Image Orientation] key.
If this setting is not correct, a suitable image may not be
transmitted.
(3) Touch the [OK] key.
5-54
SCANNER/INTERNET FAX
Tablet
J
A B
E F
L
K L
Contents