Wheel And Tire Torque Specifications; Torque Specifications; Fluid Capacities - RAM 1500 2019 User Manual

WHEEL AND TIRE TORQUE
SPECIFICATIONS
Proper lug nut/bolt torque is very important
to ensure that the wheel is properly mounted
to the vehicle. Any time a wheel has been
removed and reinstalled on the vehicle, the
lug nuts/bolts should be torqued using a
properly calibrated torque wrench using a
high quality six sided (hex) deep wall socket.

FLUID CAPACITIES

Fuel (Approximate)
1500 Regular Cab Shortbed/Crew Quad Cab Models
1500 Regular Cab Shortbed/Crew Quad Cab Models
1500 Regular Cab Longbed/Crew Quad Cab Models (Optional)
Engine Oil With Filter
3.6L Engine (We recommend you use SAE 0W-20, API Certified)
228

Torque Specifications

Lug Nut/Bolt Lug Nut/ **Lug
Torque Bolt Type Nut/Bolt
Size
130 Ft-Lbs Cone M14
(176 N·m) 1.50
**Use only your authorized dealer recom-
mended lug nuts/bolts and clean or remove
any dirt or oil before tightening.
NOTE:
Do not oil wheel studs. For chrome wheels,
do not substitute with chrome plated wheel
nuts.
Inspect the wheel mounting surface prior to
mounting the tire and remove any corrosion
Lug Nut/
or loose particles.
Bolt
Tighten the lug nuts/bolts in a star pattern
Socket
until each nut/bolt has been tightened twice.
Size
Ensure that the socket is fully engaged on
x 22 mm
the lug nut/bolt (do not insert it halfway).
After 25 miles (40 km), check the lug nut/
bolt torque to be sure that all the lug nuts/
bolts are properly seated against the wheel.
To avoid the risk of forcing the vehicle off
the jack, do not tighten the lug nuts/bolts
fully until the vehicle has been lowered.
Failure to follow this warning may result in
personal injury.
U.S.
23 Gallons
26 Gallons
33 Gallons
5 Quarts
WARNING!
Metric
87 Liters
98 Liters
121 Liters
4.7 Liters