Preparations For Jacking - RAM 1500 2019 User Manual

Inserting The Extension Tubes Into The Access
Hole
4. Rotate the lug wrench handle counter-
clockwise until the spare tire is on the
ground with enough cable slack to allow
you to pull it out from under the vehicle.
Rotating The Lug Wrench Handle
190
5. Pull the spare tire out from under the
vehicle to gain access to the spare tire
retainer.
Pulling The Spare Tire Out
6. Lift the spare tire with one hand to give
clearance to tilt the retainer at the end of
the cable.
Gaining Access To The Retainer
7. Pull the retainer through the center of the
wheel.
Pulling The Retainer Through The Center Of The
Wheel
NOTE:
The winch mechanism is designed for use
with the extension tubes only. Use of an air
wrench or other power tools is not recom-
mended and can damage the winch.

Preparations For Jacking

1. Park on a firm, level surface. Avoid ice or
slippery areas.
WARNING!
Do not attempt to change a tire on the side
of the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.