RAM 1500 2019 User Manual page 126

3. Pass the tether strap hook over the head-
rest behind the child seat, through the
tether strap loop behind the seat and over
to the right or left outboard tether strap
loop.
Tether Strap Through Center Tether Strap Loop
4. Attach the hook to the outboard tether
strap loop (see diagram). Tighten the
tether strap according to the child seat
manufacturer's instructions.
124
Tether Strap Through Center Tether Strap Loop
And Attached To Outboard Tether Strap Loop
Installing Three Child Restraints:
1. Place a child restraint on each outboard
rear seat. Route the tether straps following
the directions for right and left seating
positions, above.
2. Attach both hooks to the center tether strap
loop, but do not tighten the straps yet.
3. Place a child restraint on the center rear
seat. Route the tether strap following the
directions for the center seating position,
above.
4. Attach the hook to the outboard tether strap
loop.
Outboard And Center Seating Positions Shown
5. Tighten the tether straps according to the
child seat manufacturer's instructions,
tightening the right and left tether straps
before the center tether strap.
WARNING!
An incorrectly anchored tether strap

could lead to increased head motion and
possible injury to the child. Use only the
anchorage position directly behind the
child seat to secure a child restraint top
tether strap.
(Continued)