RAM 1500 2019 User Manual page 120

Outboard Tether Anchorage
Center Tether Anchorage Over Head Rest
118
LATCH-compatible child restraint systems
will be equipped with a rigid bar or a flexible
strap on each side. Each will have a hook or
connector to attach to the lower anchorage
and a way to tighten the connection to the
anchorage. Forward-facing child restraints
and some rear-facing child restraints will
also be equipped with a tether strap. The
tether strap will have a hook at the end to
attach to the top tether anchorage and a way
to tighten the strap after it is attached to the
anchorage.
Center Seat LATCH
All Quad Cabs Or Crew Cab Full Bench Rear
Seat: No Lower Center LATCH Anchorages
Available
WARNING!
Do not install a child restraint in the

center position using the LATCH system.
This position is not approved for
installing child seats using the LATCH
attachments. You must use the seat belt
and tether anchor to install a child seat
in the center seating position.
WARNING! (Continued)
Never use the same lower anchorage to

attach more than one child restraint.
Please refer
LATCH-Compatible Child Restraint" for
typical installation instructions.
Crew Cab Split Bench Rear Seat: Center Lower
LATCH Anchorages Available
If a child restraint installed in the center posi-
tion blocks the seat belt webbing or buckle for
the outboard position, do not use that outboard
position. If a child seat in the center position
blocks the outboard LATCH anchors or seat
belt, do not install a child seat in that outboard
position.
Never use the same lower anchorage to
attach more than one child restraint.
Please refer
LATCH-Compatible Child Restraint" for
typical installation instructions.
Always follow the directions of the child restraint
(Continued)
manufacturer when installing your child restraint.
Not all child restraint systems will be installed as
described here.
to "To Install A
WARNING!
to "To Install A