Daytime Running Lights (Drl) - If Equipped; Multifunction Lever; High/Low Beam Switch; Automatic High Beam Headlamp Control - If Equipped - RAM 1500 2019 User Manual

Headlight Switch
1 — Rotate Head- 4 — Cargo/Bed Light
light Controls Switch
2 — Ambient Light 5 — Front Fog Light
Dimmer Switch
3 — Instrument Pan-
el Dimmer
Rotate the headlight switch clockwise to the
first detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the second detent for headlight,
parking light, and instrument panel light
operation.
Daytime Running Lights (DRL) — If
Equipped
The headlights on your vehicle will illumi-
nate when the engine is started and the
transmission is in any gear except PARK.
This provides a constant "lights on" condition
until the ignition is turned OFF. The lights
illuminate at less than half of normal inten-
sity. If the parking brake is applied, the
Daytime Running Lights (DRL) will turn off.
Also, if a turn signal is activated, the DRL
lamp on the same side of the vehicle may
turn off for the duration of the turn signal
activation. Once the turn signal is no longer
active, the DRL lamp will illuminate.
NOTE:
If allowed by law in the country in which the
vehicle was purchased, the Daytime Running
Lights can be turned on and off using the
Uconnect System, refer to
Settings" in "Multimedia" in the Owner's
Manual for further information.

Multifunction Lever

The multifunction lever is located on the left
side of the steering column.
Multifunction Lever

High/Low Beam Switch

Push the multifunction lever toward the
instrument panel to switch the headlights to
high beam. Pulling the multifunction lever
"Uconnect
back toward the steering wheel will turn the
low beams back on, or shut the high beams
off.
Automatic High Beam Headlamp Control
— If Equipped
The Automatic High Beam Headlamp Control
system provides increased forward lighting at
night by automating high beam control
through the use of a digital camera mounted 29