Removal Of Jack And Tools - RAM 1500 2019 User Manual

Removal Of Jack And Tools

To access the jack and jack tools, you must
remove the plastic access cover located on
the side of the front passenger's seat. To
remove the cover, pull the front part of the
cover (closest to the front of the seat) toward
you to release a locking tab. Once the front
of the cover is loose, slide the cover toward
the front of the seat until it is free from the
seat frame.
Pull Jack Access Cover From Front
Remove the jack and tools by turning the
wing bolt counterclockwise, remove the wing
bolt and then slide the assembly out from
under the seat.
188
Jack And Tools
Release the tool bag straps from the jack and
remove tools from bag.
Jack And Tool Bag
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
Assembled For Spare Tire Lowering/Raising
1 — Lug Wrench
2 — Long Extension Without Spring Clip 2
3 — Long Extension With Spring Clip 3
4 — Long Extension With Spring Clip 4
5 — Short Extension 5
NOTE:
If the tailgate is lowered, the jack extension
with hook can be added to this assembly to
enable lowering of the spare tire without
having to raise the tailgate.