Nortel Meridian 1 Option 11C Manual page 82

Page 82 of 126 DTI Maintenance
553-3011-315 Standard 13.00
The procedure for a near-end per-loop loopback test is as follows:
Procedure
Disable the 2.0 Mb DTI card
Run the loopback test
The procedure for a near-end per-channel loopback test is as follows:
Procedure
Disable the 2.0 Mb DTI
channel
Run the loopback test
Figure 9
Near End Trunk Loopback
NEAR END
Option 11
RMST L (per loop— loop
disabled)orRMST L CH (per
channel—channel disabled)
January 2002
Overlay
LD 60
LD 60
Overlay
LD 60
LD 60
NTAK10
Command
DISL L
RMST L
Command
DSCH L CH
RMST L CH
FAR END
Far End Switch
Placed in remote loopback
(per loopÿ or per channel)