Nortel Meridian 1 Option 11C Manual page 121

LD 15 – Enable the ISDN option.
Prompt Response
REQ: NEW
CHG
TYPE: NET
CUST 0-31
ISDN YES
PNI 1-32700
HNPA NPA
HNXX NXX
HLOC XXX
LSC 1-9999
AC2
NPA
NXX
INTL
SPN
LOC
ISL Implementation and Maintenance
Description
Add new data
Change existing data
Networking data
Customer number
Customer is equipped with ISDN
Customer private network identifier. MUST be unique to this
customer in the private network. Used as part of the setup message
for feature operation such as Network Ring Again and Network
ACD...
Telephone area code for this Meridian 1. Sent as part of setup
message as CLID
Telephone local exchange code for this Meridian 1. Sent as part of
setup message as calling line identification.
Home location code (NARS)
One to four digit Local Steering Code established in the Coordinated
Dialing Plan (CDP). The LSC prompt is required for Calling Line I.D.
and Network ACD.
Access Code 2. Enter call types (type of number) that use access
code 2. Multiple responses are permitted. This prompt only appears
on NARS equipped systems. If a call type is not entered here, it is
automatically defaulted to access code 1.
E.164 National
E.164 Subscriber
International
Special Number
Location Code
Page 121 of 126
Option 11C 2.0 Mb DTI/PRI