Nortel Meridian 1 Option 11C Manual page 29

2.0 mb dti/pri
Hide thumbs Also See for Meridian 1 Option 11C:
Table of Contents

Advertisement

Prompt
Response
SREF CC0
1-9
CC1
11-19
PREF CC1
11-19
SREF CC1
11-19
CC2
21-29
PREF CC2
21-29
SREF CC2
21-29
CC3
31-39
PREF CC3
31-39
SREF CC3
31-39
CC4
41-49
PREF CC4
41-49
SREF CC4
41-49
CCGD
0-(15)-1440
CCAR
0-(15)
2.0 Mb DTI Implementation
Description
Slot number of the DTI2 card containing the primary clock
reference for the main cabinet.
Slot number of the DTI2 card containing clock controller 1.
Slot number of the DTI2 card containing the primary clock
reference for the IP expansion cabinet 1.
Slot number of the DTI2 card containing the secondary clock
reference for the IP expansion cabinet 1.
Card number of for clock controller 2.
Slot number of the DTI2 card containing the primary clock
reference for the IP expansion cabinet 2.
Slot number of the DTI2 card containing the secondary clock
reference for the IP expansion cabinet 2.
Card number for clock controller 3.
Slot number of the DTI2 card containing the primary clock
reference for the IP expansion cabinet 3.
Slot number of the DTI2 card containing the secondary clock
reference for the IP expansion cabinet 3.
Card number for clock controller 4.
Slot number of the DTI2 card containing the primary clock
reference for the IP expansion cabinet 4.
Slot number of the DTI2 card containing the secondary clock
reference for the IP expansion cabinet 4.
Clock controller free run guard time in minutes.
Clock controller audit rate. The time, in minutes, between
normal CC audits. Only programmable on units equipped with
2-Mb DTI.
Note 1: The clock controller prompts will only appear for clocks
which are valid for the machine type being configured. The prompts
will only appear if the system is in a valid state for the definition of the
2.0 Mb DTI clock controller data (i.e., the DTI clock references must
be unused or in a free-run mode).
Note 2: Before programming clock controller references, the
QPC775 clock controller card(s) must be plugged in, and the
switches on the system's QPC441 3 Port Extender appropriately set.
Unless this is done, the PREF and SREF prompts are not given.
Page 29 of 126
Option 11C
2.0 Mb DTI/PRI

Advertisement

Table of Contents
loading

Table of Contents