Clock Controller Commands; 2.0 Mb Dti Tests - Nortel Meridian 1 Option 11C Manual

ENLL L
LCNT (L)
RCNT (L)
SLFT (L)
STAT (L)

Clock Controller commands

Below is a quick reference list of clock controller commands in LD 60.
Command
DIS CC 0
ENL CC 0
SSCK 0
TRCK XXX
PCK
SCLK
FRUN

2.0 Mb DTI tests

Self test/Local loopback
The NTAK10 self-tests when requested in LD 60. This procedure checks the
sanity of the on board processors, operation of memory and peripheral
hardware as well as per-channel and per-loop loopback.
Enable 2.0 Mb DTI
List alarm counters
Reset alarm counters
Do 2.0 Mb DTI self-test
List 2.0 Mb DTI status
Action
Disable clock controller N
Enable clock controller N
Status of clock controller N
Set clock controller tracking. XXX can be:
Track primary clock reference source
Track secondary clock reference source
Free run mode
DTI Maintenance
Option 11C
Page 75 of 126
2.0 Mb DTI/PRI