Nortel Meridian 1 Option 11C Manual page 30

Page 30 of 126 2.0 Mb DTI Implementation
LD 16 – Configure the service routes.
Prompt Response
REQ NEW
CHG
TYPE RDB
CUST 0-31
ROUT 0-30
TKTP
TIE
COT
DID
RCLS (EXT)
INT
DTRK
(NO)
YES
DGTP DTI2
...
NCNA YES (NO)
NCRD YES (NO)
PTYP
(ATT)
AST
AOT
(DTT)
DCT
DST
AUTO YES (NO)
ICOG IAO
ICT
OGT
553-3011-315 Standard 13.00
Description
Add or Change Route data block
Route data block
Customer number
Route number
Service routes allowed with ISDN
Tie trunk route
Central office trunk
Direct Inward Dial trunk
Class marked route as Internal or External
Digital trunk route
Analog
Digital
Select a digital trunk type of 2.0 Mb DTI
Network Call Name is (is not) allowed
Network Call Redirection. Allows network call redirection
messages to be sent (or blocks messages if NCRD=no).
Port type at far end:
Analogue tie trunk routes:
Aanalogue Tie trunk
Analogue satellite Meridian 1 Tie trunk or ESN satellite
Meridian SL-1 Tie trunk
Analogue Tie trunk, used instead of ATT whenever the
Meridian 1 has one or more digital satellite trunk routes (DST)
to any digital satellite Meridian 1which includes OPX sets
Digital tie trunk routes:
Digital Tie trunk
Combination digital Tie trunk
Digital satellite Meridian 1 Tie trunk
Auto-terminate must be NO if response to DSEL is VOD
Incoming and outgoing trunk
Incoming trunk
Outgoing trunk
January 2002