Nortel Meridian 1 Option 11C Manual page 54

Page 54 of 126 2.0 Mb PRI Implementation
Table 18
NTBK05CA pinouts
From:
50 pin MDF
connector
pin 23
pin 48
pin 24
pin 49
PRI software programming
Task summary list
553-3011-315 Standard 13.00
NTBK05CA pinouts
The pinouts for the NTBK05CA cable are as follows:
To:
Transmit coax
connector
Inner conductor
outer conductor
—
—
The following information describes the process required to program basic
2.0 Mb PRI on the Meridian 1 Option 11C.
PRI cards must be configured before defining the DCH links or PRI
applications.
Prompts which do not show a response can be left as default. For more
information on any of these prompts, refer to Administration (553-3001-311).
Note: Before installing PRI cards in IP expansion cabinets, first
configure the expansion cabinets for IP connectivity. Refer to Overlay
117 in the Meridian 1 Software input/output guide(553-3001-511) for
further information.
The following is a summary of the tasks in this section:
1 LD 17 – Add a PRI card.
2 LD 17– Add a DCHI or DDCH.
3 LD 15 – Define a PRI customer.
January 2002
To:
Receive coax
connector
—
—
Inner conductor
outer conductor
To:
50 pin MDF
connector
—
—
—
—