Nortel Meridian 1 Option 11C Manual page 24

Page 24 of 126 2.0 Mb DTI Implementation
DFLT (1)-16
The following prompts define the pad levels.
The receiving pad code is r and the transmission pad code is t. These entries have the range
0-15. The pad values (in decibels) relating to these codes are shown after this table.
ONP r t
OPX r t
TNLS YES (NO)
DFLT (1)-16
The following prompts define the pad levels.
The receiving pad code is r and the transmission pad code is t. These entries have the range
0-15. The pad values (in decibels) relating to these codes are shown after this table.
ONP r t
OPX r t
DTT r t
SDTT r t
NTC r t
TRC r t
DCO r t
VNL r t
DTO r t
ACO r t
AFX r t
ADD r t
SATT r t
ATO r t
DTI2 r t
553-3011-315 Standard 13.00
For NEW only. The table is used for default values.
On-premises extension
Off-premises extension
TN List. This is for the print command only.
A YES response means that a list of the trunk TNs using the
requested PAD category tables will be printed after the table.
For NEW only. The table is used for default values.
On-premises extension
Off-premises extension
Digital TIE trunks
Digital Satellite TIE trunks
Nontransmission compensated
Transmission compensated
digital COT, FEX, WAT, and DID trunks
Via Net Loss
2.0 Mb DTI digital TOLL office trunks
Analogue CO or WATS trunks
Analogue FEX trunks
Analogue DID trunks
Analogue satellite TIE trunks
Analogue TOLL office trunks
2.0 Mb DTI trunk
(prompted only if the 1.5/2.0 Mb Gateway feature is equipped
and TYPE=DTI2)
January 2002