Nortel Meridian 1 Option 11C Manual page 122

Page 122 of 126
LD 16 – Enable the ISL option.
Prompt Response
REQ NEW
CHG
TYPE RDB
CUST 0-31
ROUT 0-127
TKTP TIE
DTRK YES
NO
ISDN YES
MODE ISLD
DCHI XX
PNI 1-32700
IFC
SLl
CTYP aaa
<CR>
INAC YES
553-3011-315 Standard 13.00
ISL Implementation and Maintenance
Description
Add new data
Change existing data
Route data block
Customer number
Route number
TIE trunk route
Enter YES if this is a Digital Trunk Interface (DTI or PRI)
ISDN option
Route for ISL application
DCHI port no. in CFN which will carry the D-channel for this TIE
trunk route.
customer private network identifier-must be the same as the CDB
PNI at the far end.
interface type
Meridian 1 to Meridian 1
Call Type. Enter the call type to be associated with the outgoing
route for direct dialing using the trunk access code (instead of NARS
access code)
Insert Access Code. Permits the NARS AC1 or AC2 access code to
be re-inserted automatically on an incoming ESN call.
January 2002