Saving An Execution File For Sd Memory Card Operation - Panasonic FP7 Series User Manual
Cpu unit
Hide thumbs
Also See for FP7 Series:
- Command reference manual (1222 pages) ,
- User manual (275 pages) ,
- Additional functions manual (45 pages)
Table of Contents
Advertisement
5.4 SD Memory Card Operation
2.
Press in an SD memory card into the SD memory card slot until it locks.
3.
Close the SD memory card cover.
● If the card cover is opened during access to the SD memory card while the CPU unit is
operating, a self-diagnosis error is detected and operation is stopped. Access to the SD
memory card is also stopped.
● Before removing an SD memory card, confirm that the operation monitor LED [SD] on the CPU
unit has been turned off.
● Do not apply an excessive force to the card cover when opening or closing it or when the cover
is left open. Otherwise, the cover attachment part will be deformed to cause malfunction in the
cover recognition switch mounted inside the product.
5.4.3 Saving an Execution File for SD Memory Card Operation
In order to enable operation by an SD memory card, it is necessary to convert the created
project into an auto execution file. Take the following procedure.
5-10
WUME-FP7CPUH-09
Advertisement
Table of Contents
