Connecting Stack Cables - Huawei S2700 Hardware Installation And Maintenance Manual

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Figure 7-5 Connecting a copper cable
A
D
To remove a copper cable, gently push the cable connector inward and then pull the handle of
the connector. Do not forcibly pull the cable connector. See
Figure 7-6 Removing a copper cable
A
D
Step 6 Arrange the copper cables to make them parallel, and bundle them with cable ties at a spacing
of 150-300 mm (5.9-11.8 in.). Use a cable tie gun to cut off redundant cable ties.
Step 7 Replace all the temporary labels on the copper cables with permanent labels.
----End

7.5 Connecting Stack Cables

Issue 13 (2017-11-20)
B
E
B
E
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Connecting a Switch
C
Figure 7-6.
C
64