Huawei S2700 Hardware Installation And Maintenance Manual page 164

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Type and Structure
Label for Signal Cables
The label for signal cables is L-shaped with fixed dimensions, as shown in
Figure 13-81 Label for signal cables
To specify more clearly the position of a cable, use the dividing lines on the label. For
example, there is a dividing line between the cabinet number and the chassis number, and
another one between the chassis number and the slot number. Each dividing line is light blue
(Pantone 656c) and 1.5 mm x 0.6 mm (0.06 in. x 0.02 in.).
The cut dotted line helps to fold the label when affixed to the cable, and its size is 1 mm x 2
mm (0.04 in. x 0.08 in.).
The word "TO:" (upside down in the figure) at the lower right corner of the label is used to
identify the opposite end of the cable on which the label is affixed.
Power Cable Label
The label for power cables should be attached to the identification plate on the cable ties that
are attached to the cable. The identification plate has an embossed area 0.2 mm x 0.6 mm
(0.008 in. x 0.02 in.) around (symmetric on both sides), and the area in the middle is for
affixing the label, as shown in
Issue 13 (2017-11-20)
Figure 13-82.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 Appendix
Figure 13-81.
156