S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Figure 13-25 Putting the connector body onto the wire holder
Step 9 Push the metal shell toward the connector body until the wire holder and the connector body
are engaged completely. Crimp the connector, as shown in
Figure 13-26 Crimping the connector
Step 10 Push the jacket towards the metal shell until the metal shell is covered. This completes the
assembly of one end of the cable, as shown in
Figure 13-27 Pushing the metal shell
Issue 13 (2017-11-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
13-26.
Figure
13-27.
13 Appendix
115