Huawei S2700 Hardware Installation And Maintenance Manual page 58

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Never look directly into an optical module or the ends of optical fibers. Optical modules and
connected fibers emit laser radiation that can cause eye damage.
l Do not touch the edge connector of an optical module during the installation.
l Install an optical module on a port before connecting optical fibers to the transceiver
l Install dust plugs on idle optical ports.
Tools and Accessories
l
l
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. When wearing an ESD wrist strap, ensure that it is in
close contact with your wrist and grounded properly.
Step 2 Remove the dust plug from an optical port. Keep the dust plug for future use.
Step 3 Ensure that the optical module is correctly oriented and gently push it into the optical port
until you hear a click.
If the optical module cannot be completely inserted into the optical port, do not force it into
the port. Turn the optical module 180 degrees and try again.
Figure 6-1 Installing an optical module
Issue 13 (2017-11-20)
DANGER
NOTICE
module.
ESD wrist strap or ESD gloves
Dust plugs
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Modules
50