Huawei S2700 Hardware Installation And Maintenance Manual page 140

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown
in Figure
Figure 13-57 Removing an unshielded Ethernet connector
----End
Installing Fiber Connectors
Context
l After you remove the dustproof cap, ensure that the fiber pins are clean and install them as
l When you disassemble fiber connectors, you must use a dedicated tool if the connectors
Cleaning Fiber Connectors
Procedure
Step 1 Clean the pins of a fiber connector by using lint-free cotton and alcohol.
Step 2 Clean the pins again by using dust-free cotton. If necessary, clean the pins by using an air gun.
Ensure that the pins are free from any fiber or debris.
----End
Installing an FC Fiber Connector
Issue 13 (2017-11-20)
13-57.
NOTICE
soon as possible.
are densely installed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 Appendix
132