Huawei S2700 Hardware Installation And Maintenance Manual page 69

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Fiber connectors must be tidy and clean to ensure normal communication. If a fiber connector
is contaminated, clean it with fiber cleaning fabric.
Tools and Accessories
l
l
l
l
l
l
Procedure
Step 1 Determine the number and type of ports to be connected and plan the cabling routes.
Step 2 Obtain the desired types, quantity, and lengths of optical fibers.
Step 3 Wear an ESD wrist strap or ESD gloves. When wearing an ESD wrist strap, ensure that it is in
close contact with your wrist and grounded properly.
Step 4 Attach temporary labels to both ends of each optical fiber and number them corresponding to
port numbers. For details, see
Step 5 Remove the dust plugs from optical modules and the dust caps from the optical fibers to be
connected.
Step 6 Connect optical fibers to the optical modules on the switch, matching the numbers on the
optical fibers to those on the ports. To connect them, align the fiber connector with the bores
on the optical module and insert the fiber connector. When you hear a click, the fiber
connector is securely connected. See
that they are all correctly connected.
Issue 13 (2017-11-20)
NOTICE
ESD wrist strap or ESD gloves
Corrugated pipe
Fiber binding tape
Marker
Engineering labels for optical fibers
(Optional) Tweezers
NOTE
Connect the receive and transmit ends of a fiber connector to the receive and transmit bores of the
optical module.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13.5.2 Engineering Labels for Optical
Figure 7-3. After connecting the optical fibers, verify
7 Connecting a Switch
Fibers.
61