Huawei S2700 Hardware Installation And Maintenance Manual page 134

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
l
Issue 13 (2017-11-20)
Figure 13-44 Installing two terminals back to back
NOTICE
Ensure that the OT terminal is not in contact with other terminals or metal
components.
c. Move the cable slightly and ensure that it is securely connected, as shown in
13-45.
Figure 13-45 Installed OT terminal
Install two OT terminals on a post.
Before you install two OT terminals on a post, ensure that the two terminals can be
installed on the post and that the electrical connecting pieces have a large contact area.
Two OT terminals can be installed using any of these methods:
– Bend the upper OT terminal at a 45- or 90-degree angle, as shown in
– Cross the two terminals, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 13-47.
13 Appendix
Figure
Figure 13-46.
126