Huawei S2700 Hardware Installation And Maintenance Manual page 149

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Figure 13-75 Installing a new mold in the COAX crimping tool
Keep the short side of the mold inwards and the long side outwards, with the teeth of the mold
aligning from the larger size to the smaller size.
Step 5 Hold the handles of the COAX crimping tools tightly to match the mold and the jaw
completely. Align the screw holes, as shown in
Figure 13-76 Aligning the screw holes
Step 6 Hold the handles of the COAX crimping tools with one hand. Tighten the two fastening
screws clockwise.
crimping tool.
Issue 13 (2017-11-20)
NOTICE
Figure 13-77
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 13-76.
and Figure 13-78shows the mold installed in the COAX
13 Appendix
141