Replacing The Mold Of The Crimping Tool - Huawei S2700 Hardware Installation And Maintenance Manual

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Figure 13-71 Disassembling an MPO fiber connector
----End

13.2.5 Replacing the Mold of the Crimping Tool

Procedure
Step 1 Hold the handles of a pair of COAX crimping tools. Loosen the two fastening screws
counterclockwise, as shown in
Figure 13-72 Loosening two fastening screws
Step 2 Hold the handles of the COAX crimping tools to open the self-locking mechanism. The jaw
of the COAX crimping tools opens automatically, as shown in
Issue 13 (2017-11-20)
Figure 13-72.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 Appendix
Figure 13-73.
139