Scenario 2: Desk Mounting - Huawei S2700 Hardware Installation And Maintenance Manual

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
----End

5.3 Scenario 2: Desk Mounting

Context
This installation method applies to all switch models except the S5710-HI and S6700-EI.
Follow these precautions:
l
l
l
Issue 13 (2017-11-20)
a. Align the rear mounting brackets with the rear mounting bracket guide rails. Then,
gently slide the switch into the cabinet along the guide rails.
b. Align the holes on the cable management frames with the floating nuts on the front
mounting rails, and secure the cable management frames with M6 screws using a
Phillips screwdriver.
NOTICE
Do not hold the cable management frames to move the switch as doing so may damage
the cable management frames.
In Figure 5-12, the distance between front and rear mounting rails is 545-655 mm
(21.5-25.8 in.).
Figure 5-12 Supporting the switch using cable management frames and rear mounting
brackets
Ensure that the desk is flat, sturdy, and properly grounded.
To allow sufficient airflow around the switch, leave at least 50 mm (2.0 in.) clearance
behind and on both the left and right sides of the switch.
Do not place any objects on the switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing a Switch
a
b
35