Stack Cables; Table 4-12 Common Optical Connectors - Huawei Quidway S3300 Series Hardware Description

4 Cables
Parameter
Single mode or
multimode
Connector shape

Table 4-12 Common optical connectors

SC/PC optical connector
FC/PC optical connector
ST/PC optical connector

4.7 Stack Cables

This section describes the structure and technical specifications of a stack cable.
Applications
A stack cable of the S3300 is the PCI-E cable, which interconnects the specified stack
interfaces. The S3300s connected with a stack cable form a logical switch to implement packet
forwarding.
4-14
Criterion
Optical module type
l The optical transmitting module of the multitransverse mode is
connected to the multimode fiber.
l The optical transmitting module of the single-longitudinal mode or
multi-longitudinal mode is connected to the single mode fiber.
NOTE
If the optical fiber jumper is used, the connector connected to the device must be
the LC/PC connector, and the connector connected to the remote end must be of
the same type as the remote end interface.
l Cube: SC/PC, LC/PC, and MTRJ/PC
l Column: ST/PC and FC/PC
NOTE
The two ends of a stack cable are covered by the ESD-preventive caps.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S3300 Series Ethernet Switches
LC/PC optical connector
MTRJ/PC optical connector
-
Hardware Description
Issue 01 (2011-01-30)