Huawei S2700 Hardware Installation And Maintenance Manual page 112

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Step 5 Push the heat shrink tubing (A) toward the connector until the tube covers the crimped part,
and then use a heat gun to heat the tube, as shown in
Figure 13-5 Heating the heat shrink tubing (OT terminal)
Stop heating the shrink tubing when the connector is securely locked in the shrink tubing. Do
not heat the shrink tubing too long as this may damage the insulation coating.
----End
Assembling the JG Terminal and Power Cable
Context
Figure 13-6
Figure 13-6 Components of a JG terminal and a power cable
A. JG terminal B. Heat-shrinkable tubing C. Insulation layer of a power
Issue 13 (2017-11-20)
NOTICE
shows the components of a JG terminal and a power cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
cable
13 Appendix
13-5.
D. Conductor of a power cable
104