Huawei S2700 Hardware Installation And Maintenance Manual page 46

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
l
l
l
l
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. When wearing an ESD wrist strap, ensure that it is in
close contact with your wrist and grounded properly.
Step 2 Use M4 screws to attach a front mounting bracket to each side of the switch. The type of
mounting brackets and the installation method differ depending on switch model.
shows the installation methods of different mounting brackets.
Figure 5-15 Installing mounting brackets
Step 3 Place the switch against the wall and mark the drilling positions through the holes of the
mounting brackets. See
Issue 13 (2017-11-20)
Marker
M4 screws (four or six, depending on the switch model. See
M6 expansion bolts (four per switch, purchased separately)
Front mounting brackets (two per switch)
NOTE
The M4 screws and front mounting brackets are included in the installation accessory package.
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-16.
5 Installing a Switch
Figure 5-15.)
Figure 5-15
38