Huawei S2700 Hardware Installation And Maintenance Manual page 133

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Installing Power Adapters
Installing the OT Terminal
Procedure
l
Issue 13 (2017-11-20)
Install an OT terminal.
a. Align the hole of the OT terminal (conductor upward) with a connecting hole, as
shown in Figure 13-42.
Figure 13-42 Aligning the OT terminal with a connecting hole
NOTE
When you install an OT terminal, the crimping sleeve is installed as shown in
where A is correct and B is incorrect.
Figure 13-43 Installing an OT terminal, showing the orientation of crimping sleeve
b. Place the spring washer and flat washer in turn, mount a matching screw, and fasten
it clockwise, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 13-44.
13 Appendix
Figure 13-43,
125