Huawei S2700 Hardware Installation And Maintenance Manual page 52

S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. When wearing an ESD wrist strap, ensure that it is in
close contact with your wrist and grounded properly.
Step 2 Use a Phillips screwdriver to remove the M4 screw from the ground point on the switch, as
shown in
Figure 5-21 Removing the M4 screw from the ground point
Step 3 Attach the M4 lug of the ground cable to the ground point on the switch with the M4 screw
you removed in step 2. See
Figure 5-22 Connecting the ground cable to the switch
Issue 13 (2017-11-20)
NOTE
The ground cable is included in the installation accessory package.
Figure 5-21. Keep the M4 screw for later use.
NOTE
The ground cable has an M4 lug at one end and an M6 lug at the other end. The M4 lug is the smaller of
the two.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-22.
5 Installing a Switch
44