Configuration Connection - Teldat H1+ Installation Manual

1 Installing the Router
USB Connector
Fig. 16:

1.2.5 Configuration Connection

1.2.5.1 Configuring using the local console (CONF connector)
The Teldat H1+/H1+GE router has a female RJ45 connector on the rear panel labeled as "Conf." which provides ac-
cess to the device's local console. For configuration, you must connect the "Conf." port to an asynchronous terminal
(or to a PC with terminal emulation).
Configuration connector
Fig. 17:
Note
The configuration of the terminal must be:
- Speed: 9600 bps.
12
Teldat S.A.
Teldat H1+/H1+GE