Table of Contents
Advertisement
1
INTRODUCTION
Information about this manual
This manual describes the HOIST and CRANE software specifically for load handling applications,
supplementing the description in the ADV200 drive manual.
ADV200 hardware and software version
This manual applies to the drive hardware and software version:
ADV200 ASY:
7.2.7 (or later)
ADV200 SYN:
7.2.7(or later)
and to its optional cards for acquisition from encoder and expansion of inputs.
ADV200 FP Manual, menu 26 – APPLICATIONS. On ADV200 HC models, the HC application installs by
default on the APPLICATIONS / APPLICATION 1 menu and replaces the PID application. The parameters list
is shown in chapter 4 below.
Application Version
This manual applies to software version ADV200 HC V V 3.0.0 (or later).
ADV200-HC Manual
V/f
FOC OL
√
NO
NO
FOC CL
√
√
√
Page 4 of 55
Advertisement
Table of Contents
