Procedure
•
Using your remote control, select Ignore or press
Related Topics
Calling
Hold a Call
In a point-to-point call, you can place a call on hold, and then answer an incoming call, make an
outgoing call, or switch between two calls.
Procedure
•
Press
Home on the remote control, then select Active Call > Hold.
When a call is on hold, On hold displays on the screen for 5 seconds. After 5 seconds, the hold
icon
displays and remains on the screen until all calls are resumed or disconnected.
Related Topics
Calling
Hold a Call and Place a Call
You can place your current call on hold and place a call to another contact.
Procedure
1 Press
on the remote control.
2 Place the call using your preferred method.
Related Topics
Calling
Switch Between Point-to-Point Calls
When you have a call on hold, you can switch between the held and active calls.
Printed from Polycom, Inc. (http://documents.polycom.com)
.
Page 19